{"product_id":"reloading-die-holder","title":"Reloading Die Holder","description":"\u003ch2\u003eOne versatile reloading die rack system for every setup\u003c\/h2\u003e\n\u003cp\u003eMost die holders are stuck in one spot and one size for good. This one packs 8 or 16 dies close together, keeps every one easy to grab and works wherever you have room: freestanding or screwed to the bench, or on the wall.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity (16 slot):\u003c\/strong\u003e 16 dies in two rows of 8, plus 4 shell holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity (8 slot):\u003c\/strong\u003e 8 dies in two rows of 4, plus 2 shell holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Standard 7\/8-14 dies with lock rings up to 1-3\/8 in across\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBases:\u003c\/strong\u003e Weighted benchtop stand, Bring Your Own Ballast benchtop stand or wall mount base; racks swap between them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (benchtop stand):\u003c\/strong\u003e 16 slot is 10.75 in wide, 8 slot is 7 in wide; both are 5 in deep and 5.5 in tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize (wall mount base):\u003c\/strong\u003e 16 slot is 10.75 in wide, 8 slot is 5.25 in wide; both are 2.75 in deep and 5.75 in tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-made PCTG, a tough engineering polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Benchtop stand is freestanding or screws to the bench; wall mount base hangs from two screws. Both take #6 or #8 screws (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBallast (benchtop stand):\u003c\/strong\u003e Steel shot in the feet, or empty feet on Bring Your Own Ballast versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e About 5 minutes with a 2.5 mm Allen wrench (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Georgia, USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips:\u003c\/strong\u003e Within 3 business days, free on orders of $50 or more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne rack system, three bases:\u003c\/strong\u003e Every Die Holder is a rack set on one of three bases: the weighted benchtop stand, the Bring Your Own Ballast stand or the wall mount base. Racks swap between bases, so your holder can grow, shrink or relocate as your bench changes. Step up from 8 to 16 slots with a new rack set, or move your racks from the bench to the wall. Extra bases and rack sets are sold separately in our \u003ca href=\"https:\/\/purpleprimer.us\/products\/reloading-die-holder-parts\"\u003eReloading Die Holder Parts\u003c\/a\u003e listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for big die collections:\u003c\/strong\u003e Run a progressive press? Your specialty dies, like decappers and bullet pullers, finally have a home, along with the spares that don't live in a toolhead. Load lots of calibers on a single-stage press? Every die is ready to pull and thread in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep each caliber together:\u003c\/strong\u003e Each group of four die slots has its own shell holder spot, so a full die set and its shell holder stay together. The spots fit standard shell holders from Hornady, RCBS, Redding, Lee and others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for long dies:\u003c\/strong\u003e On the benchtop stand, both rows are angled, so top-row dies have about 7 in of clearance below the lock ring. In the bottom row, the slots over the feet (four on the 16 slot, two on the 8 slot) allow 2-1\/8 in below the lock ring, and the rest allow 3 in. On the wall mount base, every slot allows about 2-5\/8 in below the lock ring. On either base, there's no practical limit above the lock ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested with dies from:\u003c\/strong\u003e Lee, RCBS, Hornady and Dillon. Other brands should fit too, since 7\/8-14 dies share a standard diameter. Each die needs a lock ring to hang in its slot. Dies with Hornady Lock-N-Load or Lee Breech Lock bushings installed won't fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStable without screws:\u003c\/strong\u003e On the weighted benchtop stand, steel shot in the feet keeps the center of gravity low. The stand stays planted whether it's full, empty or loaded on one side only. The mounting holes are there if you'd rather make it permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBring Your Own Ballast:\u003c\/strong\u003e Already have shotgun shot, bullets or other weight on hand? The Bring Your Own Ballast versions are the same 8 or 16 slot stand with empty feet, at a lower price. Each foot holds about 1.7 cubic inches, roughly 4.5 oz of steel shot or 6.5 oz of lead shot. The feet ship separately from the brackets with a cap over the cavity. Remove the cap, fill the foot, then screw it to its bracket. The bracket covers the opening but doesn't seal it, so we don't recommend anything fine enough to trickle out, like sand. If you use sand anyway, seal it in with a layer of epoxy before attaching the foot. The stability described above assumes a full load of steel or lead shot. Lighter fill won't be as stable, but the mounting holes are always an option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWall mount base:\u003c\/strong\u003e No room on your bench or shelves for a stand? The wall mount base puts your dies on the wall, makes better use of vertical space and costs less than the benchtop stands. Each bracket hangs from a single screw at the top, and its bottom rests against the wall. Assemble the holder first and hang it as one piece so everything lines up. It takes #6 or #8 screws with any common head, like pan or flat head, in a length that suits what you're mounting to. It goes on any surface strong enough to hold it with screws or anchors, and several can hang side by side or stacked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse the right anchors:\u003c\/strong\u003e Proper anchors are a must, since they set how much the wall mount can hold. Put one screw in a stud and the other in an anchor, or use two anchors or a backer board. On drywall, use anchors with a heavy load rating, like Twist-N-Lock style anchors, toggle bolts or something equally strong. With anchors like these, the wall mount has easily held a full load of dies for years in our testing. Skip the ribbed plastic expansion anchors from typical assortment kits, since they pull out too easily. Hanging several side by side on drywall? Space them far enough apart for your anchors. A backer board removes that limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to take abuse:\u003c\/strong\u003e PCTG was chosen for its toughness. It's impact resistant and rigid enough to hold 16 steel dies. It also resists most solvents and chemicals used around firearms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 racks\u003c\/li\u003e\n\u003cli\u003e2 brackets, benchtop or wall mount depending on your base\u003c\/li\u003e\n\u003cli\u003eBenchtop stands only: 2 feet with rubber pads and threaded inserts installed, each with a cap attached for shipping. Weighted feet come filled with steel shot; Bring Your Own Ballast feet come empty.\u003c\/li\u003e\n\u003cli\u003eM3 x 8 mm socket head cap screws: 12 with a benchtop stand, 4 with the wall mount base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to keep running:\u003c\/strong\u003e Need a replacement part? Racks and bases are sold separately in our \u003ca href=\"https:\/\/purpleprimer.us\/products\/reloading-die-holder-parts\"\u003eReloading Die Holder Parts\u003c\/a\u003e listing, and you can email us at \u003ca href=\"mailto:mail@purpleprimer.us\"\u003email@purpleprimer.us\u003c\/a\u003e for anything else. If you'd rather source your own hardware, here's what we use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews:\u003c\/strong\u003e M3 x 8 mm socket head cap screws (12 for a benchtop stand, 4 for the wall mount base)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber pads (benchtop stand):\u003c\/strong\u003e 3\/8 in diameter x 1\/8 in tall rubber bumpers (8), manufacturer part number BS34BL12X25RP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBallast (benchtop stand):\u003c\/strong\u003e Steel or lead shot ballast. Standard shotgun shot also works, but shot sold as ballast is much cheaper. We use \u003ca href=\"https:\/\/www.rotometals.com\/steel-shot\/\" rel=\"noopener\" target=\"_blank\"\u003esteel shot ballast from RotoMetals\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFit Guarantee:\u003c\/strong\u003e The Die Holder is built around the standard 7\/8-14 die, so most dies drop right in. If it doesn't work with your dies, contact us. Send it back within 30 days of receiving it and we'll refund you. See our \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHornady, Lee, RCBS, Redding, Dillon and other brands are named only to describe compatibility or sourcing. Purple Primer Store is not affiliated with or endorsed by any of them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Purple Primer","offers":[{"title":"Benchtop Stand - Weighted \/ 8 Slot Rack Set","offer_id":54464811499803,"sku":"PP-DH-BENCH-8","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Benchtop Stand - Weighted \/ 16 Slot Rack Set","offer_id":54464811532571,"sku":"PP-DH-BENCH-16","price":39.5,"currency_code":"USD","in_stock":true},{"title":"Benchtop Stand - Bring Your Own Ballast \/ 8 Slot Rack Set","offer_id":54464811565339,"sku":"PP-DH-BENCH-8BYOB","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Benchtop Stand - Bring Your Own Ballast \/ 16 Slot Rack Set","offer_id":54464811598107,"sku":"PP-DH-BENCH-16BYOB","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Wall Mount Base \/ 8 Slot Rack Set","offer_id":54473089155355,"sku":"PP-DH-WALL-8","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Wall Mount Base \/ 16 Slot Rack Set","offer_id":54473089188123,"sku":"PP-DH-WALL-16","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0857\/6863\/4651\/files\/PXL_20261021_233910833.jpg?v=1792626761","url":"https:\/\/purpleprimer.us\/products\/reloading-die-holder","provider":"Purple Primer Store","version":"1.0","type":"link"}